Arctic P8 8cm Pressure Optimised PWM PST Case Fan Black Fluid

DescriptionSpecificationType: 8cm Case FanFan Connector(s): 4-pinInstallation: Screws#Hide#LED Lighting: NoColour: BlackLED Lighting: -Weight: 81 gFan Dimensions: 80 x 80 x 25 mmFan Controller: PWMRotation Speed: 200 - 3000 RPMFan Bearing: Fluid Dynamic BearingAir Flow: 23.4 cfm | 40.3 m3/hNoise level: 0.3 SonePower: Current/Voltage: 0.09 A/12 VStarting Voltage: 3.4 VAdditional Features: See OverviewPackage Type: RetailPackage Weight: 0.1000 kgWarranty: 6 Years%%%% Pressure-optimised 80 mm Fan with PWM PST   Optimised For Static Pressure During the development of the new P8 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P8 PWM PST is particularly suitable for use on heatsinks and radiators.   More Efficient Technology The motor is driven by a latest-generation PWM IC, which enables the new P8 PWM PST to operate much more efficiently than its predecessors. This saves energy without compromising performance.   Maximum Quietness, Minimum Vibration   Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor.   Extended Lifespan   A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Consequently, we give a manufacturer warranty of 6 years. 200 To 300 RPM Regulated VIA PWM PST   Thanks to the 4-pin connector, the RPM can be regulated in a broad spectrum via PWM. In this way, noise is kept at a minimum while maximum cooling performance is guaranteed when needed.   High Quality Bearing Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan. Two Way Instillation Push warm air out of the case Pull cool air into your case