Asus PROART Z890-CREATOR WIFI Intel Z890 1851 ATX 4 DDR5 HDMI 2

DescriptionSpecificationMotherboard Type: DesktopForm Factor: ATXSocket: Intel 1851Chipset: Intel Z890#Hide#DDR Type: DDR5CPU Support: Support Intel Core Ultra Processors (Series 2)Click here for CPU supportRAM Technology: "DDR5 (Dual Channel)Non-ECC, Un-buffered, Clocked Unbuffered DIMM (CUDIMM)*Supports Intel XMPASUS Enhanced Memory Profile IIIDIMM FitSupports DIMM Flex*Non-ECC, un-buffered DDR5 memory supports On-Die ECC function "RAM Slots: 4 x DIMMRAM Speeds: Up to 9066+MT/s (OC)Maximum Memory: 192GBGraphics: Integrated GraphicsGraphics specifications may vary between CPU typesGraphics Ports: 1 x HDMI2 x Thunderbolt 5 support DisplayPort and Thunderbolt video outputs1 x Thunderbolt 4 support DisplayPort and Thunderbolt video outputsPCI/PCI Express: Intel Core Ultra CPUs (Series 2):2 x PCIe 5.0 x16 (supports x16 or x8/x8 modes) Intel Z890 Chipset*:1 x PCIe 4.0 x16 (supports x4 mode)Storage: 4 x SATA III5 x M.2Intel Core Ultra CPUs (Series 2):M.2_1 (2242/2260/2280/22110) - PCIe 5.0 x4M.2_2 (2242/2260/2280) - PCIe 4.0 x4Intel Z890 Chipset:M.2_3 (2242/2260/2280) - PCIe 4.0 x4M.2_4 (2242/2260/2280) - PCIe 4.0 x4M.2_5 (2242/2260/2280) - PCIe 4.0 x4 & SATARAID: "Intel Rapid Storage Technology supports PCIe RAID 0/1/5/10, SATA RAID 0/1/5/10, M.2 slot from CPU only supports RAID 0/1/5"Wireless: "Wi-Fi 72x2 Wi-Fi 7 (802.11be) Supports 2.4/5/6GHz frequency bandSupports Wi-Fi 7 320MHz bandwidth, up to 5.8Gbps transfer rate.Bluetooth v5.4"LAN: 10GB LAN & 2.5GB LANAudio: Realtek ALC1220P 7.1 Surround Sound High Definition Audio CODECUSB Ports Supported: Rear:2 x Thunderbolt 5 (USB Type-C)1 x Thunderbolt 4 (USB Type-C6 x USB 10Gbps Type-A1 x USB 2.0Front:1 x USB 20Gbps Type-C2 x USB 5Gbps2 x USB 2.0Back Panel I/O Ports: 2 x Thunderbolt 5 (USB Type-C)1 x Thunderbolt 4 (USB Type-C6 x USB 10Gbps Type-A1 x USB 2.01 x DisplayPort (Input only)1 x HDMI1 x Wi-Fi module1 x Marvell AQtion 10Gb Ethernet1 x Intel 2.5Gb Ethernet2 x Gold-plated audio jacks1 x BIOS FlashBack buttonInternal I/O Connectors: 1 x 4-pin CPU Fan1 x 4-pin CPU OPT Fan1 x 4-pin AIO Pump5 x 4-pin Chassis Fan1 x 24-pin Main2 x 8-pin +12V CPU5 x M.2 (Key M)4 x SATA 6Gb/s1 x USB 20Gbps Type-C1 x USB 5Gbps1 x USB 2.03 x Addressable Gen2.: 1 x Clear CMOS button1 x COM Port1 x CPU Over voltage jumper1 x Chassis Intrusion1 x Front Panel Audio1 x SPI TPM (14-1 pin)1 x 10-1 pin Front System Panel1 x Thermal SensorAccessories: 2 x SATA 6Gb/s cables1 x ASUS WiFi Q-Antenna1 x Q-connector2 x M.2 Q-Latch packages2 x M.2 rubber packages1 x ProArt accessory bag1 x ACC Express activation key card1 x Quick start guideAdditional Features: See OverviewPackage Type: RetailWarranty: 3 Years#Hide#M.2 Slot(s): Yes (M.2)#Hide#No. LAN Ports: 2 x LAN#Hide#Max LAN Speed: 10GB LAN#Hide#Wi-Fi: Yes (Wi-Fi)%%%% Intel Z890 LGA1851 ATX content creation motherboard with PCIe® 5.0, DDR5 slots, two USB4® ports, 10G and 2.5G Ethernet, WiFi 7, five M.2 slots, plus a USB 20Gpbs front-panel header Thunderbolt™ 5 & Thunderbolt™ 4 Onboard Dual Ethernet & WiFi 7 ProArt Creator Hub - Features Pantone's color management utilities Exclusive AI Technologies - AI Overclocking, AI Cooling II,AI Networking II and AI Advisor Easy PC DIY to Make Your Life Easier - PCIe Slot Q-Release Slim, M.2 Q-Release, M.2 Q-Side, M.2 Q-Latch and WiFi Q-Antenna PCIe® 5.0 - Full support for next-gen graphics cards 16+1+2+2 Power Stages Unleash DDR5 with DIMM Fit and AEMP III NPU Boost       The ProArt Z890-CREATOR WIFI empowers creators of all levels by maximizing the performance of the latest Intel® Core™ Ultra Processor (Series 2) processors with 16+1+2+2 team power stages, DDR5 slots, PCIe® 5.0 and lightning-fast connectivity including dual Thunderbolt™ 5 ports, 10G and 2.5G Ethernet, and WiFi 7.   This motherboard manifests a professional, elegant and precise vision for content creators of all kinds, with a style elevated by tone-on-tone layers of black infused with metallic gold touches. A subtly designed I/O cover provides a sleek and sophisticated look while concealing the premium connectors within.     All You Need for Maximum Productivity Thunderbolt™ Connectivity - Get immersed in your creations with two Thunderbolt™ 5 and one Thunderbolt™ 4 ports for connecting to all your compatible content-creation gadgets, enjoying up to 80 Gbps of bi-directional bandwidth, and up to 120 Gbps with Bandwidth Boost. To further push your creative work with one 8K or two 4K color-accurate monitors, you can connect your discrete graphics card to the onboard DisplayPort™ In port on the rear I/O panel and direct the video output via the Thunderbolt™ 5 port*. 10 Gb & 2.5 Gb Ethernet - Dual Ethernet ports provide fast data transfers simultaneously for 2.5G internet streaming or uploading and 10G for local network-attached storage (NAS), allowing for improved data organization and security. WiFi 7 - The revolutionary WiFi 7 is up to 4.8X faster than standard WiFi 6, thanks to technology like 320 MHz channels on the 6 GHz band and 4K QAM*. Multi-Link Operation (MLO) provides a more stable WiFi connection and lower latency, unlocking the realms of the unknown in gaming, streaming and industrial IoT. ASUS WiFi Q-Antenna - Dual transceivers support the 2.4, 5 and 6 GHz bands to enable faster throughput, with directional sensitivity to improve signal quality and cover greater distances. Five Onboard M.2 Slots - ProArt Z890-CREATOR WIFI features one PCIe 5.0 M.2 slot and four PCIe 4.0 M.2 slots to enjoy the fastest data transfers of up to 128 Gbps*, and all M.2 slots support NVMe RAID configurations to take advantage of the latest available speeds. PCIe 5.0 Expansion Slots - Both of the x16 expansion slots are PCIe 5.0, offering incredible speeds of up to 64 GB/s for compatible devices. To bear the brunt of massive graphics cards, they are also protected with SafeSlot retention brackets, and the top slot can be released easily via Q-Release Slim. Seamless Dual-PC Sharing with Thunderbolt™ Share - Experience a revolutionary way to interact with two PCs using Thunderbolt™ Share—the ultrafast connectivity solution that transforms your dual-PC setup. Seamlessly share screens, keyboards, mice, storage and files between two computers, with the unparalleled speed of Thunderbolt™ technology.             The Core of Your Powerful Workstation Robust Power Design - Designed to meet the needs of high-core-count CPUs, the ProArt Z890-CREATOR WIFI features 16(90A)+1(90A)+2(90A)+2(80A) power stages that integrate high-side and low-side MOSFETs and drivers into packages rated for up to 90 amps each. This configuration ensures optimal power delivery, efficiency, stability and performance for new Intel® Core™ Ultra Processors (Series 2). Eight-Layer PCB Design - This enhances quick heat dissipation around the voltage regulators for enhanced stability and overclocking. ProCool II Connectors - These are built to tight specifications to ensure flush contact with PSU power lines. The resulting lower impedance helps to prevent hotspots and connector failure. Superior Chokes & Capacitors - These are engineered to resist extreme temperatures, providing a higher level of performance than the industry standard. Digi+ VRM Control - The ASUS Digi+ voltage-regulator module (VRM) is one of the finest in the industry and ensures ultra-smooth power delivery to the CPU.           Intelligent AI Solutions AI Overclocking - Maximized CPU performance and predictions for ideal CPU and cooling settings push your system to its limits. AI Cooling II - Balance the thermals and acoustics of any build with a single click. AI Networking II - Optimize network performance, helping to ensure seamless connectivity and maximized WiFi 7 speeds. AI Advisor - Using AI technology to understand natural-language questions or scenario descriptions, ASUS AI Advisor allows users to explore the functionality and advanced features of ASUS motherboards in a simple and straightforward way.             Performance Boost NPU Boost - The integrated Neural Processing Unit in Intel® Core™ Ultra Processors (Series 2) efficiently accelerates AI workflows — and NPU Boost lets you do more with it. This BIOS feature overclocks the NPU with just one click, increasing performance by up to 24%*.           Memory The ProArt Z890-CREATOR WIFI enhances DDR5 performance by providing overclocking options that would otherwise be locked, whether you are dealing with high-speed or entry-level memory modules. DIMM Fit - DIMM Fit is an ASUS-exclusive BIOS feature that precisely analyzes individual memory modules to optimize performance and pinpoint potential issues. This offers peak efficiency, compatibility and system stability. Whether you are an overclocker seeking ultimate performance, a competitor pursuing the most responsive gameplay or a content creator prioritizing rock-solid stability, DIMM Fit provides optimizations tailored to your needs and your hardware configuration. AEMP III - ASUS Enhanced Memory Profile III (AEMP III) is an advanced firmware feature that empowers users to achieve unparalleled memory performance with cutting-edge CUDIMM memory. Through a two-phase comprehensive tuning process, AEMP III first optimizes the clock driver and then the memory frequency. This results in the best balance between performance and stability, even at cutting-edge speeds of DDR5-8000 or higher.*             EZ PC DIY PCIe® Slot Q-Release Slim - With PCIe Slot Q-Release Slim, simply tilt the card toward the latching mechanism to automatically unlock it from the PCIe slot. This makes upgrades and maintenance easier than ever before. Users no longer need to fiddle with a tricky latch or even press a button to release their graphics card from the slot. M.2 Q-Release - The new M.2 heatsink features a convenient switch to quickly remove it, eliminating the need for tiny screws during SSD installation. Its strong locking mechanism also provides a snug contact surface, helping to ensure reliable heat dissipation for your SSD. M.2 Q-Slide - A new sliding M.2 latch design supports sizes 2242, 2260 and 2280 for easy device installation. New M.2 Q-Latch - The innovative ASUS Q-Latch makes it easy to install or remove an M.2 SSD without the need for specific tools or screws. This design employs a simple locking mechanism to secure the drive and neatly detach it with one tap. Q-Antenna - With Q-Antenna, attaching a WiFi antenna to your PC is now easy and fast. Instead of slowly rotating two fasteners until they finally lock in, they just snap into place. Less hassle, and more consistent performance. Customize Your Personal Settings ProArt Creator Hub is your personal portal to monitor your PC status, personalize settings or optimize your workflow. It features an intuitive overview dashboard, with quickly switchable fan profiles and performance modes. Color Management - One of the most important things for creators is color. The top right corner allows easy access to the Color Management feature. This includes the Screen Color Picker and Image Color Extractor that make it simple to get a detailed color analysis and color information, and you can use the Color Palette to build your personal color preferences. You will also find color trends and color palettes created by the professionals at the ASUS Design Center. WorkSmart - To streamline your workflow, you can select up to 8 apps to be launched at the same time with a single desktop shortcut.             Security Control and Remote Management Advanced security management functions from ASUS Control Center Express protect the PCs and confidential data in your creative studio. USB Port Management Enable or disable the USB port, or set it to Read Only to prevent data leaks. Software Blacklist For added security, a software blacklist is available to help prevent the use of high-risk applications. Registry Editor On/Off Remotely disable the Registry Editor on client devices to prevent unauthorized changes to system configurations. Software Utilities Upgraded User Experience - BIOS Q-Dashboard and ASUS DriverHub make it easy to set up and maintain your PC, while ASUS GlideX delivers a variety of display and control options. ASUS DriverHub - ASUS DriverHub streamlines the installation and management of ASUS drivers and utilities to keep your hardware up-to-date and perform optimally. This standalone application automatically detects current driver versions and presents available updates in a list view. Users are invited to install ASUS DriverHub after OS installation. ASUS GlidEx - A cross-device, cross-platform screen-sharing, screen-control and operation solution for enhanced productivity across PCs, tablets and smartphones via USB or WiFi. It is compatible with Windows, macOS, Android and iOS.