TP-LINK (MC100CM) Multi-Mode SC Fiber Media Converter up to 2km

DescriptionSpecificationType: Multi-Mode Media ConverterEnclosure Type: ExternalBasic Functions: Half/Full-Duplex transfer mode for FX portFull Duplex Flow Control (IEEE 802.3x)Half Duplex Flow Control (Backpressure)Extends fiber distance up to 2kmLink Fault Passthrough and Far End Fault minimize the loss caused by link failure timelyPorts: 1 100M SC port1 100M RJ45 port (Auto MDI/MDIX)Standards and Protocols: "IEEE 802.3, IEEE 802.3u, IEEE 802.3x"Wave Length: 1310nmNetwork Media 10BASE-T: "UTP category 3, 4, 5 cable (maximum 100m)EIA/TIA-568 100 Ohms STP (maximum 100m)"Network Media 100BASE-T: "UTP category 5, 5e cable (maximum 100m)EIA/TIA-568 100 Ohms STP (maximum 100m)"Network Media 100BASE-FX: Multi-mode FiberTransmission Distance: 2kmLED Indicators: "PWR, FDX/Col, Link/Act, SPD"Dimensions (WxDxH): 3.7 x 2.9 x 1.1 in. (94.5 x 73.0 x 27.0 mmPower Supply: External power supplyEnvironment: Operating Temperature: 0C~40C (32F~104F)Storage Temperature: -40C~70C (-40F~158F)Operating Humidity: 10%~90% non-condensingStorage Humidity: 5%~90% non-condensingPackage Type: RetailPackage Weight: 0.5000 kgWarranty: 2 Years%%%% Highlights: • Complies with 802.3u 10/100Base-TX, 100Base-FX standards • Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely • Provides switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port • Extends fiber distance up to 2km     What This Product Does The MC100CM is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC100CM is designed for use with multi-mode fiber cable utilizing the SC-Type connector. The MC100CM supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 850nm on both transmitting and receiving data.   Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK´s 19´´system chassis, Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port and front panel status LEDs. The MC100CM will transmit at extended fiber optic distances utilizing multi-mode fiber up to 2 kilometers.