Kingston 4GB DDR3 1600MHz (PC3-12800) CL11 DIMM Memory Single

DescriptionSpecificationSeries: Kingston ValueRAMDDR Type: DDR3Size: 1 x 4GB#Hide#Individual Module Size: 4GB#Hide#Total Capacity: 4GB TotalSpeed: 1600 MHzCompliance: PC3-12800Pins: 240-pinCAS Latency: CL11Data Integrity Check: Non-ECCVoltage: 1.5VHeatsink: No#Hide#LED Lighting: NoPackage Type: Blister PackPackage Weight: 0.0225 kgWarranty: Lifetime%%%% KVR16N11S8/4 4GB 1Rx8 512M x 64-Bit PC3-12800 CL11 240-Pin DIMM   ValueRAM's 512M x 64-bit (4GB) DDR3-1600 CL11 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.5V. This 240-pin DIMM uses gold contact fingers.       Features   • JEDEC standard 1.5V (1.425V ~1.575V) Power Supply • VDDQ = 1.5V (1.425V ~ 1.575V) • 800MHz fCK for 1600Mb/sec/pin • 8 independent internal bank • Programmable CAS Latency: 11, 10, 9, 8, 7, 6 • Programmable Additive Latency: 0, CL - 2, or CL - 1 clock • 8-bit pre-fetch • Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] • Bi-directional Differential Data Strobe • Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%) • On Die Termination using ODT pin • Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C • Asynchronous Reset • PCB : Height 0.740” (18.75mm), single sided component