TP-LINK (TL-WPA8631P KIT) AC1200 Wireless Dual Band Powerline

DescriptionSpecificationKit/Single: KitWireless: YesWired Transfer Rate: 1300 MbpsWireless Transfer Rate: 1200 Mbps (Dual Band)Standards and Protocols: "HomePlug AV2, IEEE 1901, IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.11b/g/n (2.4 GHz), IEEE 802.11a/n/ac (5 GHz)"Interface(s): 3 x Gigabit Ethernet PortsAC Pass Through: YesButton(s): "Pair, LED On/Off, Wi-Fi, Reset"LED: "Power, Powerline, Ethernet, Wi-Fi (2.4 GHz), Wi-Fi (5 GHz)"Power Consumption: "TL-WPA8631P:Maximum: 13W, Typical: 11WTL-PA8010P:Maximum: 4.9W, Typical: 4.6W"Range: Up to 300 meters/1000 feet over existing electrical wiringModulation Technology: OFDMAdvanced Functions: See OverviewEncryption: "Wireless: WPA-PSK/WPA2-PSK, WEP Encryptions,Powerline: 128-bit AES Encryption"Environment: Operating Temperature: 0°C~40°C (32°F~104°F)Operating Humidity: 10%~90% non-condensingPackage Contents: "1 x TL-WPA8631P, 1 x TL-PA8010P;2 x Ethernet Cables;1 x Quick Installation Guide"Package Type: RetailPackage Weight: 0.8900 kgWarranty: 3 Years%%%% AV1300 Gigabit Passthrough Powerline ac Wi-Fi Kit HomePlug AV2 Standard - Provides ultra-fast powerline transfer speeds of up to 1300 Mbps* AC1200 Dual-Band Wi-Fi - Extends ultra-fast dual-band Wi-Fi with speeds of up to 867 Mbps on 5 GHz and 300 Mbps on 2.4 GHz* OneMeshTM - Works with your OneMeshTM router to form a unified mesh network for seamless streaming while moving around your home 2 x 2 MIMO - Establishes multiple simultaneous connections for you to enjoy higher powerline speeds and greater stability One-Touch Wi-Fi Configuration - One press of the Wi-Fi button copies the network name and password from your router. Any setting changes will be automatically applied to the entire Powerline network Wi-Fi Auto-Sync - Add additional extenders to your powerline network by pair button, uniformly sync settings such as SSID, password, Wi-Fi Schedule and LED Schedule for all network devices Plug and Play - Set up your powerline network and start enjoying fast, seamless wired/wireless connections in minutes Extra Power Socket - Get power from the outlet for your other devices with the integrated power socket 3 x Gigabit Ports - Provide secure wired networks for desktops, smart TVs or games consoles Enjoy Stable, Seamless OneMesh™ Wi-Fi onemesh Bothered by dropped connections while moving around your home? With the newest OneMeshTM technology, the kit works with your existing OneMeshTM router to form a unified Mesh network. No more switching Wi-Fi network names, enjoy uninterrupted streaming and truly seamless AC1200 Wi-Fi. 2x2 MIMO Technology for Efficient Transmissions More Stable Connections 2x2 MIMO is like adding extra lanes to a highway. It establishes multiple simultaneous connections for you to enjoy higher speeds and greater stability. Enhanced Long-Distance Performance 2x2 MIMO with Beamforming technology also offers the benefit of improved coverage throughout the home, particularly for previously hard-to-reach outlets. One Tap for a Unified Network One-Touch Wi-Fi Configuration Instantly copies your network name and password from your router for easy setup. Wi-Fi Auto-Sync Automatically applies any setting changes across the network. Your existing Wi-Fi settings will synchronize to the new extender instantly. Plug and Play in Seconds! Plug TL-PA8010P in the wall and connect it to the router. Then plug TL-WPA8631P into any desired power socket. That’s it. You’re done!   Tip: Press ‘Pair’ for more security. Don’t Lose an Outlet The passthrough powerline kit can be used like a traditional electrical socket, ensuring no power socket goes to waste. The built-in noise filter helps prevent electrical signal noise from affecting powerline performance. More Gigabit Ethernet Ports, More Devices Equipped with 3x gigabit Ethernet ports, the kit provides wired connections for 4K video and IPTV streaming, lag-free gaming, and more.     *1. Compatible with all HomePlug AV and AV2 Standard Powerline adapters. This product may not be compatible with routers or gateways with firmware that has been altered, is based on open source programs, or are non-standard or outdated.   *2. Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput and wireless coverage are not guaranteed and will vary as a result of 1) environmental factors, including building materials, physical objects, and obstacles, 2) network conditions, including local interference, volume and density of traffic, product location, network complexity, and network overhead, and 3) client limitations, including rated performance, location, connection, quality, and client condition.   *3. Maximum Powerline signal rates are the physical rates derived from HomeplugAV/AV2 specifications. Actual Powerline data throughput and Powerline range are not guaranteed and will vary as a result of network conditions and environmental factors, including electrical interference, volume of traffic and network overhead, AFCI circuit breaker, and Powerline being located in a separate circuit.